The UPES advanced microprocessor-based monitoring system is compatible with flame and gas detectors. The UPES is available in two different options: analog 4-20mA signal and digital, RS485 signal. Up to 16 devices can be connected to the UPES analog version using 4-20mA signal output from the field devices. Up to 128 devices can be connected to the UPES digital version using the RS485 signal output from the field devices.
The UPES can be used at facilities for monitoring and detecting gas concentrations and flame conditions from the field. It will signal an alarm when the programmed threshold levels for the gas concentrations are reached with an LED for each alarm level and an optional sound alarm.
The UPES centralizes detectors from the field and acts as the bridge between warning systems, automatic sprinkler systems, ventilation systems, and emergency shutdown controls.
The UPES controller has an easy-to-use interface along with display on the front of the panel as well as status LED’s (Green, Yellow, Red) to indicate the status and healthiness of the detectors connected to the UPES.
Push buttons are available which allow the user to easily navigate and perform functions such as calibration from the panel.